Exhaust Ventilation Fans

Quiet, efficient exhaust fans from 50 to 110 CFM for kitchen, bathroom and bedroom mounting.

Specifications

Exhaust Ventilation Fans — key specifications
Parameter	Value
Airflow	50 – 110 CFM
Common housing size	7-1/2" × 7-1/4" × 5-3/4"
Working temperature	−10°C to 40°C
Power supply	220–240V ~ 50/60Hz

Values as published in the 2026 product catalogue. Ask us for the model-level submittal sheet before specifying.

Features

✓Easy installation — no cutting or attic access required
✓Economic series with competitive entry pricing
✓Quiet and efficient operation
✓High-quality copper motor with centrifugal impeller
✓Suitable for kitchen, bathroom and bedroom mounting

Overview

Ceiling exhaust fans from 50 to 110 CFM, intended for kitchen, bathroom and bedroom ventilation. The family uses a copper motor with a centrifugal impeller in a common housing size of 7-1/2" × 7-1/4" × 5-3/4", so one body size covers several airflow ratings. The catalogue lists easy installation with no cutting and no attic access required.

The catalogue specification for this family is 220–240V ~ 50/60Hz, which is an export voltage rather than the 120V residential supply used in North America. A distributor intending to stock this family should confirm the supply and control arrangement for the variant they want before quoting, because that is a model-level question. Per-model airflow, sound and power figures are also still being compiled.

Where it is used

Bathroom exhaust in residential new-build and retrofit
Kitchen ventilation where a range hood is not installed
Bedroom and living-space exhaust where the catalogue lists mounting suitability
Light-commercial washrooms and utility rooms
Multi-unit residential ventilation where one housing size simplifies stocking

Selection & installation notes

01
Confirm the supply voltage and control before committing to stock. The catalogue lists 220–240V ~ 50/60Hz for this family, so the North American configuration has to be confirmed per model.
02
Size on the ventilation rate your design and the applicable code require rather than on a room-count rule of thumb. The range covers 50–110 CFM.
03
One housing size — 7-1/2" × 7-1/4" × 5-3/4" — covers the airflow range, so rough-in dimensions stay the same across ratings.
04
The listed working temperature is −10°C to 40°C. Confirm with the factory before specifying it in an unconditioned attic or in an exterior wall.
05
Keep the exhaust run short and confirm the backdraft damper arrangement; delivered airflow falls as static pressure rises.

Common questions

Is this a 120V fan?

The catalogue specification for the family is 220–240V ~ 50/60Hz. If you need a North American supply configuration, confirm it for the specific model before quoting — we will not assume a voltage.

What airflow do I need for a bathroom?

That follows the applicable code and the room volume rather than a rule of thumb. The family spans 50–110 CFM; size to the required ventilation rate and check the delivered airflow at your duct static pressure on the submittal sheet.

Does it need attic access to install?

No. The catalogue lists installation without cutting or attic access; the fan mounts into the ceiling opening. Confirm the rough-in dimensions and the duct connection for the model you order.